Part 10 - Extension to Pulsed Rotations
Once we accept that the pulsed oscillations can Lead Out gravitational energy, we can extend the same concept to pulsed rotations.
In slide 10 of http://www.energyfromair.com/beijing/taiwan2a.htm , we showed a weighted wheel on the LHS. If we rotate the weighted wheel or the unbalanced wheel slightly clockwise, it will rotate back in the anti-clockwise direction. The action is exactly like that of the pendulum.
If we rotate the unbalanced wheel one complete revolution, the wheel will decelerate when the weight moves up and accelerate when the weight moves down. Each revolution can be thought of as a Pulse. Thus rotation of an unbalanced wheel can be considered as a pulsed rotation.
This effect can be demonstrated in the simple gravity wheel:
http://theverylastpageoftheinternet.com/newclaims/GravityMotor/gravity_motor.htm
The Pulsed balanced wheel is even more efficient. (RHS diagram on the slide).
End of Part 10
Part 11 - Experimental Prototypes
(1) Pendulum Prototypes
- Bill Mehess Pendulum
- Milkovic Second Oscillation Pendulum
- Finsrud Pendulum
(2) Pulsed Rotation Prototypes
- Joseph Newman Motor
- Bedini Motor
- 225 HP Pulse Motor
- Minato Wheel
- Liang and Chao Motor
(3) Electricity Magnifier Prototypes
- Tsing Hua University Electricity agnifier
- Chas Campbell Motor
(4) Flux Change Prototypes
- Steven Mark TPU device
- Japanese Flux Change device
(5) Special Double System Prototypes
- Wang Shum Ho Electricity Generator
(6) 5th generation Prototypes
- Lee-Tseung design being implemented at Tsing Hua University etc.(Status confidential)
(7) Flying Saucer Prototypes
- The Magneto Propulsion Unit implementation shown on youtube video as Nanjing UFO (May become classified information)
Thus we have 13 to 15 demonstrated prototypes at present. Most of them can be improved. We are trying to achieve win-win scenario with the inventors at present.
End of Part 11
Building the forum index
| ltseung888 wrote: |
|
(1) Pendulum Prototypes (2) Pulsed Rotation Prototypes (3) Electricity Magnifier Prototypes (4) Flux Change Prototypes (5) Special Double System Prototypes |
This we can have sub forums about.
I feel the pendulum belongs with the gravity engines. It all becomes so simple if you look at it like this? Rotation and pendular motion are not that different. Flux changing and electricity magnifiers are also practically the same.
Without double systems the generated power suffers from each translation. They wont be much left by the time it's doing useful work. Pulse motors work but free pulses would make it much more obvious and more practical. Pendulums need pushes.
| Quote: |
| Thus we have 13 to 15 demonstrated prototypes at present. Most of them can be improved. We are trying to achieve win-win scenario with the inventors at present. |
I would much prefer to create a win-win situation globally, make it one big party.
If we all live like kings it takes 1 generation for an army of geniuses to grow up. A lot of people will study all of their lives just for the fun of it.
No rush just learning the natural way, for the fun of figuring out things. This artificial scholar method we use at the moment does not work.
I would like people to look over my topics and give their opinion on them so I can improve their workings and their presentation. Simple as that.
Thank you to Gaby's excellent work
Thanks for all the work in setting the Forum. You did all the hard work of managing, maintaining, backing up, moderating and advertising it.
We have the much easier task of pumping out information.
Your hard work will be greatly appreciated by the World when the Cosmic Energy Machines hit the Market.
Lawrence
Part 12 - The abandoned prototypes
Someone asked about the Sung Tim Fat first and second generation Cosmic Energy Machines. They wanted to know why the effort was abandoned. The first thing is to study the China Patent 99126283.2. My layman/scientist translation is as follows:
Title: Electricity Generator using Permanent Magnets
Inventor: Sung Tim Fat
Abstract:
This invention uses permanent magnets as source of energy to power electricity generators. The apparatus include axle, direction and speed changer or governor, shell, stator and rotor. The direction and speed changer or governor is on one side of the axle. The other components are on the other side of the axle. Inside the shell are at least two groups of rotors and stators. Each group contains a shell layer, a magnetic shielding layer, stator, rotator, rotating magnets and axle holder. Stator has coils with different functions. The rotors are permanently attached to the axle. The rotors have many small permanent magnets. If an extraction mechanism were added on the axle, the apparatus can be turned into an electricity generator.
*** Note that this description is very general. The same or similar description can be applied to the Joseph Newman, the Bedini Motor, the 225 HP Pulse Generator etc. My major objection (also that of the Chinese Patent Office) is the first sentence "uses permanent magnets as source of energy". Sung could not answer the following question from the Chinese Patent Office:
If it takes x units of energy to create or replenish the permanent magnets, how can you produce more than x units of energy in your invention?
He was granted the patent because his device rotated in front of the Patent Examiners. We have the Video. We later used the Lee-Tseung theory to explain the working of his invention.
You can get professional patent translators to do the proper patent translation. I shall only do a layman/scientist version that cannot be used in Law Courts.
Where to download the Video
Richard: "Looks like some members of the overunity.com forum are interested in the Sung device. I saw that 40 minute video and was convinced that the device worked. You can use rapidshare as the attach file limit here is only 12MB."
Tseung: "That is not a problem. I shall zip the 96 MB file. It should be read with Windows Media Player. Before I do that, I shall quote the warning from the Inventor and the Chinese Police. That video was used by some unauthorized persons to solicit funds. It MUST NOT be used for that purpose again. It may be used for scientific discussions only."
Nancy: "Can you repeat the story of why Sung gave up the development of his inventions? The video seemed to indicate excellent working prototypes?"
Tseung smiled: "I shall repeat the story one more time. Note that I use the term story because I was not personally involved. The story was that Dr. Liang Sing Yan heard about the Sung Invention and wanted to use that invention to recharge his battery car. They worked together for a few months.
Dr. Liang then got the brilliant idea that he could rotate the inner cylinder with ICs. He did not need to use the permanent magnets and the complex setup of the Sung invention. He succeeded. All the potential investors for Sung changed ship. Sung was obviously unhappy. However, as a scientist, he accepted the fact that his invention was not as good. He abandoned further development on his devices.
We also have the video on the Dr. Liang Car. That video was definitely used by criminals to solicit funds. Some of these criminals are in jail now.
Mr. Chao did a big improvement to overcome the hill-climbing drawback of the Liang car using banks of batteries. That improved car traveled 1,500 kilometers to Being with 8 newspapers and televisions following the journey in 2006. We have two videos. One of them was done by the Chinese Official Television Station CCTV.
I shall post these videos when appropriate. Here is the first one. It will be available for 90 days. The download time is approximately 1 hour. The link is:
http://rapidshare.com/files/48650021/Sung.ZIP.html
Lawrence Tseung
The third generation Cosmic Energy Machines Lead Out abandonment of the first and second generation.
Some previous comments on the Sung Video
(1) It is in Chinese. Can you translate it for us?
Try to get a friend who can speak Chinese. If a beer cannot do it, try wine and dine.
(2) It is too long. Can you edit it to about 2 minutes?
I do not have the video editing tools and I do not know how to edit video. Some also demanded an unedited video to reduce possibility of fake.
(3) Can you summarize the video in a couple of sentences?
The first generation used a 3-cylinder setup with axle vertical. It generated 400 watts – enough to light a bulb, power a fan and an electric drill. The machine needed initial power to start but the power can be unplugged after starting. The second generation with more electronics has the axle horizontal. It generated 20,000 watts (but very unstable with burning of electronics and coils frequently.)
(4) Can I believe all the comments in the video?
Ignore all theoretical comments on the source of energy. Sung was wrong in saying that the energy came from the permanent magnets. He now believes in the Lee-Tseung theory. Sung-Lee-Tseung are co-inventors of another flux only invention.
(5) Should I invest in the Sung devices?
Wait until you have seen the Dr. Liang and Chao videos. The best way is to visit Tsing Hua University or General Magnetic 磁普and see the many working prototypes first. The Chinese Cosmic Energy Developers with working prototypes are now highly valued in China. The well-known ones have much funding support.
Lawrence Tseung
Working Prototypes Lead Out Funding
Further comments on the Sung Video
Professor A: "Let me try to get the best scientific picture. The video started with pictures of the First Generation that had three cylinders mounted with the axle vertical. The first cylinder generated enough energy to feed the second cylinder. The second cylinder generated enough energy to feed the third cylinder. The third cylinder generated 400 watts."
Professor B: "The Invention needed a starting motor to get to a certain rotational speed. Afterwards, the starting motor could be disconnected. The generated electricity was sufficient for feedback and more. Thus it is a true perpetual motion machine leading out gravitational and/or electron motion energy."
Professor C: "The date shown on the Video was February 2000. It meant a working prototype was shown to the China Patent Office and was granted a patent even though the Inventor stated the source of energy was Permanent Magnets. That was seven years ago."
Professor A: "The Chinese Patent Law allowed the granting of a perpetual motion patent if a working prototype were demonstrated. There could be wrong theoretical explanations. The Law did not require the Patent Examiners to correct the theory of the Inventor. The Law also did not demand the Inventor to present a correct theory."
Professor B: "If Sung had partnered with Lee-Tseung at the time of the Patent Application, the Patent would have much more weight. But Lee-Tseung did not even conceive their theory until December 2004. That is Four years after the video was taken!"
Professor C: "If you were Mr. Sung, would you abandon further development of the Prototypes after you saw the superior working prototype of Dr. Liang?"
Professor A: "I would work on the Fourth generation and try to beat Dr. Liang. That was exactly what Mr. Sung did. He partnered with Lee and Tseung to work on the Flux Change only invention. However, he had to face similar inventions in Japan and USA. In USA, there are the Tom Beardon Patent and the Steven Mark TPU. In Japan, there is the well-funded Flux Change Only device - Lee Cheung Kin is a Consultant."
Professor B: "It means China dropped two generations of working Cosmic Energy Prototypes. This is similar to Microsoft not selling Windows Versions 1 and 2 to the World. Is that a good strategy?"
Professor C: "If I were in charge, I would perfect the Magneto Propulsion Unit first. If the Youtube Nanjing UFO video were true, the Chinese Engineers might already have something to replace the wheel totally."
Professor A: "In a new field, there will always be improvement. I am willing to freeze and sell a working product as soon as possible."
Lawrence Tseung
Professor Discussions Lead Out the Very Best that might take time.
Re: Part 11 - Experimental Prototypes
| ltseung888 wrote: |
| Part 11 - Experimental Prototypes
(1) Pendulum Prototypes - Bill Mehess Pendulum - Milkovic Second Oscillation Pendulum - Finsrud Pendulum (2) Pulsed Rotation Prototypes - Joseph Newman Motor - Bedini Motor - 225 HP Pulse Motor - Minato Wheel - Liang and Chao Motor (3) Electricity Magnifier Prototypes - Tsing Hua University Electricity magnifier - Chas Campbell Motor (4) Flux Change Prototypes - Steven Mark TPU device - Japanese Flux Change device (5) Special Double System Prototypes - Wang Shum Ho Electricity Generator (6) 5th generation Prototypes - Lee-Tseung design being implemented at Tsing Hua University etc.(Status confidential) (7) Flying Saucer Prototypes - The Magneto Propulsion Unit implementation shown on youtube video as Nanjing UFO (May become classified information) Thus we have 13 to 15 demonstrated prototypes at present. Most of them can be improved. We are trying to achieve win-win scenario with the inventors at present. End of Part 11 |
